Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reporting the Media Type in RME 4.2.0

is there a possibility to generate a report in RME 4.2.0 containing the media type of an interface? Something like the "Type" column in "show interface status"?

Thx

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Reporting the Media Type in RME 4.2.0

In general this is not possible. RME uses the ENTITY-MIB to build inventory for most devices, and this exact type of information is not available. The detailed device report will show you the port type as seen from the ENTITY-MIB (e.g. cevPortNIC100 for a port that shows a status type of 10/100BaseTX). It will also show you the current configured interface speed.

1 REPLY
Cisco Employee

Re: Reporting the Media Type in RME 4.2.0

In general this is not possible. RME uses the ENTITY-MIB to build inventory for most devices, and this exact type of information is not available. The detailed device report will show you the port type as seen from the ENTITY-MIB (e.g. cevPortNIC100 for a port that shows a status type of 10/100BaseTX). It will also show you the current configured interface speed.

228
Views
0
Helpful
1
Replies