Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RESTORE BACKUP IN LMS 2.6

Hi Friends

plse let me know how to restore backup for LMS 2.6.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: RESTORE BACKUP IN LMS 2.6

Shutdown the CiscoWorks Daemon Manager, then run:

NMSROOT/bin/perl NMSROOT/bin/restorebackup.pl -d /path/to/backup

If there is a generation number, you also need to specify "-gen NUMBER". For example, on Windows:

C:\PROGRA~1\CSCOpx\bin\perl C:\PROGRA~1\CSCOpx\bin\restorebackup.pl -d C:\backups

Solaris:

/opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /backups/lms

Cisco Employee

Re: RESTORE BACKUP IN LMS 2.6

This backup procedure works for all applications except IPM. For IPM, you will need to run the "ipm dbrestore" command.

PROGRA~1 is the DOS 8.3 abbreviation for "Program Files". You should always use the 8.3 path names when working with LMS on Windows. C:\PROGRA~1\CSCOpx is the default location where LMS is installed on Windows. The example commands I posted are complete commands. You would only need to adjust them for the paths used on your server.

6 REPLIES
Cisco Employee

Re: RESTORE BACKUP IN LMS 2.6

Shutdown the CiscoWorks Daemon Manager, then run:

NMSROOT/bin/perl NMSROOT/bin/restorebackup.pl -d /path/to/backup

If there is a generation number, you also need to specify "-gen NUMBER". For example, on Windows:

C:\PROGRA~1\CSCOpx\bin\perl C:\PROGRA~1\CSCOpx\bin\restorebackup.pl -d C:\backups

Solaris:

/opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /backups/lms

New Member

Re: RESTORE BACKUP IN LMS 2.6

Hi

this solution is applicable for all LMS versions.plse mention the backup procedure also.

plse re-write this command more clearlly.

PROGRA~1 WHAT DOES THIS MEAN,PLSE SPECIFY FULL COMMAND.

Regards

Vaibhav

Cisco Employee

Re: RESTORE BACKUP IN LMS 2.6

This backup procedure works for all applications except IPM. For IPM, you will need to run the "ipm dbrestore" command.

PROGRA~1 is the DOS 8.3 abbreviation for "Program Files". You should always use the 8.3 path names when working with LMS on Windows. C:\PROGRA~1\CSCOpx is the default location where LMS is installed on Windows. The example commands I posted are complete commands. You would only need to adjust them for the paths used on your server.

New Member

Re: RESTORE BACKUP IN LMS 2.6

Thanks a lot for all those information.

plse let me know the exact procedure for backup in LMS 2.6.

Regards

Vaibhav

Cisco Employee

Re: RESTORE BACKUP IN LMS 2.6

The backups can be taken through the GUI under Common Services > Server > ADmin > Backup.

New Member

Re: RESTORE BACKUP IN LMS 2.6

Thanks a lot...

i have dine the same it works..

Thank you so much.

Regards

Vaibhav

177
Views
0
Helpful
6
Replies