04-05-2006 06:18 PM
I am try to set up a reverse telnet seesion between AUX port of 3725 Router to the console port of a master switch in a 3750 Stack configuration. The configuration on the AUX port is as follows:
line aux 0
exec-timeout 20 0
no exec
transport preferred none
transport input all
transport output all
stopbits 1
And on the Switch side, the configuration is as follows:
line con 0
exec-timeout 60 0
password 7 XXXXXXXXXXXXX
I enter en the foolowing command from the router and I get the following:
telnet X.X.X.X 2097
Trying X.X.X.X, 2097 ...
% Connection refused by remote host
Deleting login session
I have tried using a rollover cable and a straight through cable between the devices but the result is the same. Does anyone have any ideas on how to make this work?
04-05-2006 07:23 PM
Can you enter the following on the aux port:
line aux 0
exec
Paresh
04-05-2006 07:51 PM
I tried that but the results are still the same. Do I have to add anymore detail to "console 0"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: