Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

reverse telnet

I am try to set up a reverse telnet seesion between AUX port of 3725 Router to the console port of a master switch in a 3750 Stack configuration. The configuration on the AUX port is as follows:

line aux 0

exec-timeout 20 0

no exec

transport preferred none

transport input all

transport output all

stopbits 1

And on the Switch side, the configuration is as follows:

line con 0

exec-timeout 60 0

password 7 XXXXXXXXXXXXX

I enter en the foolowing command from the router and I get the following:

telnet X.X.X.X 2097

Trying X.X.X.X, 2097 ...

% Connection refused by remote host

Deleting login session

I have tried using a rollover cable and a straight through cable between the devices but the result is the same. Does anyone have any ideas on how to make this work?

2 REPLIES
Purple

Re: reverse telnet

Can you enter the following on the aux port:

line aux 0

exec

Paresh

New Member

Re: reverse telnet

I tried that but the results are still the same. Do I have to add anymore detail to "console 0"

281
Views
0
Helpful
2
Replies