Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RME 3.5 - Not Responding device

Hi, there are some devices in my RME Not responding device list.

I telent to those devices and find read/write community is ok, but the "write community acccess-list counter" does not have any match.

My openveiw operator also give me complain for those devices - those devices can not be queried sometimes

Are there any IOS bug report for the following IOS ?

c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-14.T7.bin

c1700-ipbase-mz.123-26.bin

c1700-k9o3sy7-mz.123-14.T7.bin

c1700-y7-mz.124-4.T.bin

c1700-y-mz.123-20.bin

c1700-y-mz.123-22.bin

c1700-y-mz.123-22a.bin

c1700-y-mz.123-22a.bin

c2801-ipbase-mz.124-1c.bin

1 REPLY
Cisco Employee

Re: RME 3.5 - Not Responding device

You should try and troubleshoot this further. Start a sniffer trace filtering on udp/161 traffic to one of the not responding devices. Then resubmit that device. On the device, try running debug snmp packet. Check the sniffer trace to make sure RME is sending the correct community string information, and check the debug output to make sure the packets are making it to the device.

120
Views
0
Helpful
1
Replies