I've already collected the swim_debug.log and all files under the jobID directory.
You can find them in the attachment. (cw_log.rar)
The customer is using SSH to connect to the devices (telnet is not allowed in his network). This deviece is behind a firewall but I've already requested the customer to double check the FW settings. He said that it works manually, however, he got some . (dot) during the transmission.
Please let me know if you need any other file/information from the customer.
It looks like RME is setting up a FLASH-MIB operation to copy flash:c3845-advsecurityk9-mz.124-17.bin to 172.16.1.215. Is this the correct IP address for the RME server? That is, can the device in question access this IP address?
Can you do it manually from the server RME is installed on? Looks like it may be a PIX issue not allowing the tftp from the RME server to the device. Test it manually from there and also get a packet capture like jclarke said earlier for more detail.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...