RME 4.2.0 - Exclude Devices from Config Collection
Has anyone figured out how in LMS 3.1 to exclude a group of devices from Configuration Collection (but still get inventory). I have a bunch of routers I have SNMP read access to, but can't pull configs from (CE Routers on MPLS WAN). I just haven't found an effective means to exclude them from Configuration Collection in RME. Any ideas?
Re: RME 4.2.0 - Exclude Devices from Config Collection
It is not possible to exclude devices from system collection or polling jobs. However, you can disable the system collection job, then create an ad hoc Sync Archive job to collection configs from all of the desired devices.
To do this so that the list of devices collected is dynamic, go to RME > Config Mgmt > Archive Mgmt > Sync Archive, and click the radio button "Group Selector". Then, select the device groups for which you want configs to be archived. As new devices are added to those groups, they will have their configs automatically collected. Finally, select the other desired options, and schedule the job to run periodically.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...