RME 4.2 / configuration compare problem

[robetrem]

RME always flag the parameters associated with the

banner and all parameters that follows it as a delta between 2 images.

Any clue ?

[yjdabear]

Could be due to CSCsu99748

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu99748

CSCsu99748 Bug Details

Out of sync on banner when running config fetched by TFTP

Symptom: Device marked as out of sync even though show start and show run are the same. The diff viewer shows that the difference for the configs are due to multiline banners for "banner exec" and "banner login" Conditions: Appears to affect LMS 3.1 only - LMS 3.0.1 and LMS 2.6 have been observed to be unaffected. Latest running config is fetched using TFTP protocol. Telnet and SSH not affected. Banners configured for "banner exec" and "banner login". For example: banner exec " *****************************TEST******************************* " banner login " *****************************TEST******************************* " Workaround: Use telnet or SSH to do fetch the running config instead. Or, use the exclusion commands to exclude all banner config if the banner is not a necessary config to be monitored.

Status Fixed Severity 3 - moderate Last Modified In Last Year Product CiscoWorks Resource Manager Essentials Technology 1st Found-In 4.2 Fixed-In 4.2 4.3

[Joe Clarke]

Yes, this is the bug.  It is fixed in LMS 3.2/RME 4.3.