Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Blue

RME 4.2: Management Station to Device test

I have an ASA that fails SSH v1 or v2 in Management Station to Device tests, immediately. Yet, I can manually SSH (v2) on the server's CLI to the ASA just fine. It's not a timeout value issue. Is Management Station to Device test doing anything funky?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RME 4.2: Management Station to Device test

It is a timeout value issue. This is my bug CSCsx08790. The problem is the timeouts in the GUI are being evaluated as milliseconds instead of seconds. I wrote a patch (available from TAC), but the workaround is just to multiple your seconds by 1000.

1 REPLY
Cisco Employee

Re: RME 4.2: Management Station to Device test

It is a timeout value issue. This is my bug CSCsx08790. The problem is the timeouts in the GUI are being evaluated as milliseconds instead of seconds. I wrote a patch (available from TAC), but the workaround is just to multiple your seconds by 1000.

123
Views
0
Helpful
1
Replies