Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

RME 4.31 inventory collection failed on 122-33SXI3

Hi

I have the same issue with IOS 122-33 SXI3  running on 6513.

RME unable to collect the inventory details eventhough updated to LMS 3.2 .

RME version : 4.3.1

Is any workaround to solve this issue on LMS 3.2


Regards

Dileep

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RME 4.31 inventory collection failed on 122-33SXI3

Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this switch.  Do an inline edit, and increase the SNMP timeout to 10 seconds.  Save the changes, then apply them on the previous screen.  Inventory collection will then work.

8 REPLIES
Cisco Employee

Re: RME 4.31 inventory collection failed on 122-33SXI3

Post the IC_Server.log after performing an inventory collection for this device.

Re: RME 4.31 inventory collection failed on 122-33SXI3

Attached IC_server.log and Device IP is 172.16.30.1

Regards

Dileep

Cisco Employee

Re: RME 4.31 inventory collection failed on 122-33SXI3

Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this switch.  Do an inline edit, and increase the SNMP timeout to 10 seconds.  Save the changes, then apply them on the previous screen.  Inventory collection will then work.

Re: RME 4.31 inventory collection failed on 122-33SXI3

Yes , it worked .

can you please clarify why this happend, is it due to LMS or IOS.

There were two changes

1. upgraded  IOS to 122-33SXI3 from 122-18 SXF16.

2. upgraded LMS 3.1 to 3.2

Cisco Employee

Re: RME 4.31 inventory collection failed on 122-33SXI3

The need for this is due to IOS, and the time it takes to process requests for the CISCO-FLASH-MIB on this platform and version of code.

New Member

Re: RME 4.31 inventory collection failed on 122-33SXI3

Hi Clarke,

I am also facing the similar issue with IOS 12.2(33) SXI1, the Core Switches are in VSS mode. Inventiry collection shows failed for these devices. I am using LMS 3.1 with the following submodule versions:

NameVersionLicense StatusSize
CiscoWorks Common Services3.2.0LicensedNot applicable
Campus Manager5.1.0Purchased5000
CiscoView6.1.8LicensedNot applicable
CiscoWorks Assistant1.1.0LicensedNot applicable
Device Fault Manager3.1.0Purchased5000
Internetwork Performance Monitor4.1.0Purchased5000
Integration Utility1.8.0LicensedNot applicable
LMS Portal1.1.0LicensedNot applicable
Resource Manager Essentials4.2.0Purchased5000

Cisco Employee

Re: RME 4.31 inventory collection failed on 122-33SXI3

If the information in this thread did not solve your issue, then start a new thread for your specific problem.

Bronze

Re: RME 4.31 inventory collection failed on 122-33SXI3

Solved it for us too :-) thanks.

Geert

1315
Views
5
Helpful
8
Replies
CreatePlease login to create content