I set up config collection setting for periodic polling on a daly and for perodic colletion on a weekly basis. Perodic collection jobs fine without any errors. Perodic polling jobs failed every day. ArchivePoller shows 163 device success and 3 failed. Error is always the
same. See attachment. Strange is, in most jobs are every day different devices.
This error points to a problem fetching the vlan.dat from this switch. In order for RME to fetch vlan.dat, it must be able to login to the device using either telnet or SSH, and TFTP the vlan.dat file back to the RME server. The error indicates that the enable credential in DCR is incorrect for this device. Verify the DCR credentials are correct. If you are using telnet, get a sniffer trace of all telnet traffic to this device when archive polling is running. That should illustrate the problem more clearly.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.