Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RME devices showing duplicate user defined group

on the past I have problem(vey slow) on topologyservices to open user defined group created on CS.I didn't get any Solution from TAC. so I have created another user defined group under CM and I am using those groups on CM topology services because they are very fast to open for topology view. however recently I have find out the user defined group under "RME" showing duplicate entery for all the groups. I am suspected my be RME got the info from Both CS and CM and listed them together? not sure

   My question is how I can get rid of these duplicate groups from" RME devices" please check attached screen shoot.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: RME devices showing duplicate user defined group

Are you saying you created User-defined groups with the same name in different applications?  If so, then what you are seeing is expected.  If you want to delete the duplicate groups, do so under Common Services > Groups > Group Admin.

Cisco Employee

Re: RME devices showing duplicate user defined group

There is a procedure to remove the groups directly from the database (i.e. by dropping the group tables in the cmf database), but you will need to contact TAC to get this.

4 REPLIES
Cisco Employee

Re: RME devices showing duplicate user defined group

Are you saying you created User-defined groups with the same name in different applications?  If so, then what you are seeing is expected.  If you want to delete the duplicate groups, do so under Common Services > Groups > Group Admin.

New Member

Re: RME devices showing duplicate user defined group

Thanks!

New Member

Re: RME devices showing duplicate user defined group

currently I have 190 groups on CS, so do I need to delete 190 times or there is a way to delete all groups at once?Thanks!!!

Cisco Employee

Re: RME devices showing duplicate user defined group

There is a procedure to remove the groups directly from the database (i.e. by dropping the group tables in the cmf database), but you will need to contact TAC to get this.

186
Views
0
Helpful
4
Replies