Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

RME inventory collection problem

I have 5 device RME 4.0.6 unable collect the inventory, I did remove/ add more than 3 time but still not inventory collected for those 5 devices. I have attached IC-log out put. any help greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RME inventory collection problem

RME is timing out trying to fetch data from the CISCO-FLASH-MIB. Try increasing the SNMP timeout for these devices under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

2 REPLIES
Cisco Employee

Re: RME inventory collection problem

RME is timing out trying to fetch data from the CISCO-FLASH-MIB. Try increasing the SNMP timeout for these devices under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

New Member

Re: RME inventory collection problem

Thank you so much Joe, exactly right!!! it's solved.

114
Views
0
Helpful
2
Replies
CreatePlease to create content