12-23-2009 11:56 AM
I am trying to get inventory report for all Model number: WS-C2924C-XL-EN model but RME report keep telling me I don't have that one. but I know I have plenty. RME only pull generall report for whole WS-C2924C model. how I can pull the inventory report for WS-C2924C-XL-EN. Thanks, "
Solved! Go to Solution.
12-23-2009 12:22 PM
You could use RME's Netshow to do a show ver on your switches, then you can parse the results. It should save you a little time.
12-23-2009 12:01 PM
You can't. This model number is not available via SNMP. The MIB only provides the numeric value of ws-c2924c-xl(131). Internally, there is no difference between the -EN and the -A.
12-23-2009 12:20 PM
thanks for your response, do you have any suggestion how I can pull out this device out
of 4000 switches we have? may be we have less than 50 this model, it's painfull
to log each device and check sh ver.any kind of suggestion apperciated.
12-23-2009 12:22 PM
You could use RME's Netshow to do a show ver on your switches, then you can parse the results. It should save you a little time.
12-24-2009 08:34 AM
thank you so very much!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide