Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RME inventory report

I am trying to get inventory report for all Model number: WS-C2924C-XL-EN  model but RME report keep telling me I don't have that one. but I know I have plenty. RME only pull generall report for whole WS-C2924C model. how I can pull the inventory report for WS-C2924C-XL-EN.    Thanks,  "

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RME inventory report

You could use RME's Netshow to do a show ver on your switches, then you can parse the results.  It should save you a little time.

4 REPLIES
Cisco Employee

Re: RME inventory report

You can't.  This model number is not available via SNMP.  The MIB only provides the numeric value of ws-c2924c-xl(131).  Internally, there is no difference between the -EN and the -A.

Community Member

Re: RME inventory report

thanks for your response, do you have any suggestion how I can pull out this device out

of 4000  switches we have? may be we have less than 50 this model, it's painfull

to log each device and check sh ver.any kind of suggestion  apperciated.

Cisco Employee

Re: RME inventory report

You could use RME's Netshow to do a show ver on your switches, then you can parse the results.  It should save you a little time.

Community Member

Re: RME inventory report

thank you so very much!!!

211
Views
0
Helpful
4
Replies
CreatePlease to create content