Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RME managed devices number greater than total DCR devices

Number of managed devices reported for DCR slave RME is greater than the total number of devices in the DCR.

See attached screen shots.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RME managed devices number greater than total DCR devices

This is certainly a product of the troubleshooting of the other issues. There are some ghost devices left in RME. Identifying them is possible by combing through the database. Alternatively, if you haven't done a lot in RME yet, you can reinitialize the RME database, and start fresh. It might be a good idea to hold onto this until the DCR issues have been resolved.

1 REPLY
Cisco Employee

Re: RME managed devices number greater than total DCR devices

This is certainly a product of the troubleshooting of the other issues. There are some ghost devices left in RME. Identifying them is possible by combing through the database. Alternatively, if you haven't done a lot in RME yet, you can reinitialize the RME database, and start fresh. It might be a good idea to hold onto this until the DCR issues have been resolved.

169
Views
0
Helpful
1
Replies