RME Netconfig job - 2500's / 2600's

[martyyates]

Hi all,

trying to update an ACL and make a daylight savings change to some routers. The 2500 and 2600's are failing with the following:

*********************

Protocol ==>

Message: ERROR:RME_CDL1031:

Transport session to device failed

TFTP: Failed on the device.

Failed to detect SSH version running on the device.

*******************

Telnet and SNMP RO are good to the device from RME.

Are these device types supported in RME in terms of Netconfig?

thanks,

Marty.

[Joe Clarke]

The devices are supported. You should pick one failing device, start a sniffer trace filtering on all traffic to that device, then re-execute your job. The trace should present a clearer picture as to why the transport protocols are failing.

[martyyates]

thanks once again Joe. Will do.