In RME out-of-sync summary , i want to delete the old sumary(i.e) there is no difference exists in the Running and startup config. So i want to delete, Please tell me how to delete this old summary from RME out-of-sync
You need to sync the configs in RME. Perform a Sync Archive job, and check the "Fetch Startup" box. That will cause RME to fetch both the current running and startup configs from the device. If there truly are no differences, then the out-of-sync entry will go away.
That said, there are some known issues with out-of-sync between running and startup, so if the entry remains even after a successful Sync Archive, then you will need to post a screenshot showing the differences RME is detecting.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...