I am using a LMS v 3.0. I want to Upload & Download the Software Images through RME Server which i couldn't succeed. While downloading the image from a device. I am getting this error
SWIM1124: Failed to copy the image from Flash due to the reason - copyInvalidServerAddress :invalid server address specified.
Retry the operation. If the problem persists, check the Bug Toolkit application for any known issues on the running image version.
I am attaching the Output files as well.
One more thing which i want to mention here, we are running a MPLS cloud. The LMS & Device Mgmt Interface (Lo 50) are on same VRF. i can ping the device from LMS but i need to give "ping vrf ABC ip 10.13.3.21 source lo 50" on the device to ping LMS server. Do i need to give VRF Aware commands to get it done? Because my AAA/Logging/SNMP based commands are vrf aware.
The way RME does the image transfer is to set some objects in the CISCO-FLASH-MIB which tells to device to, for example, TFTP the image from the RME server. Therefore, the device must be able to initiate a TFTP transfer from the RME server's IP address. However, the CISCO-FLASH-MIB is not VRF-aware. If the device cannot reach the RME server's IP address, then this will not work. This sounds like the case.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...