The version of RME I am using 4.0.4 we verified the configs as with all other the devices we have in CiscoWorks but we get an error RCMD Sev4 RCMDDNSFail DNS hostname/IP address mismatch. 172.18.20.11(CiscoWorks) unknown to DNS.
I went in RME>Admin>System Preferences>LogLevel Settings and ran a debug against the failed devices. Attached is the log file.
Then your problem is DCR credentials. It looks like you only have an SNMP RO community string configured in DCR for this device. You need to add an SNMP RW string (for TFTP) and a username, password, and enable password (for telnet).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...