Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RME unable to telnet to devices presenting "username:" prompt

In the network of my latest LMS 3.2 installation a  lot of the devices is presenting a telnet prompt with a lowercase "u" in username. This seems to cause the RME to not be able to login to the devices. I remember from earlier that it was possible to edit a file on the LMS server to decide which prompts were acceptable. Does anyone know if this still is possible or how to solve this problem?

Everyone's tags (5)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: RME unable to telnet to devices presenting "username:" promp

You can add custom prompts by editing NMSROOT/objects/cmf/data/TacacsPrompts.ini.  For example, set the content to:

USERNAME_PROMPT=username:

Cisco Employee

Re: RME unable to telnet to devices presenting "username:" promp

You can add several prompts by separating them with a ','.  For example:

USERNAME_PROMPT=Username:,username:, etc

4 REPLIES
Cisco Employee

Re: RME unable to telnet to devices presenting "username:" promp

You can add custom prompts by editing NMSROOT/objects/cmf/data/TacacsPrompts.ini.  For example, set the content to:

USERNAME_PROMPT=username:

Community Member

Re: RME unable to telnet to devices presenting "username:" promp

Many thanks for your input, it solved my problem

Do you also know what to do if there are several different prompts presented? Just add lines of USERNAME_PROMPT= in the file?

Cisco Employee

Re: RME unable to telnet to devices presenting "username:" promp

You can add several prompts by separating them with a ','.  For example:

USERNAME_PROMPT=Username:,username:, etc

Community Member

Re: RME unable to telnet to devices presenting "username:" promp

Ok, thanks a lot!

495
Views
0
Helpful
4
Replies
CreatePlease to create content