We have a branch where we have cisco call manager solution to provide EXTN to users.Branch is having a PRI connection. I have provided with one analog EXTN from this PRI range. Is it possible to use this analog EXTN to access the router through aux port from HUB location. If yes , do i need to place a modem to terminate this EXTN in my router ?
We wanted to use analog EXTN to login the router.Is there any other way...
Note: Analog extn can be reachable from any landline and Mobile phone.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...