Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

running/startup config through SNMP

Hello,

I wanted to download configs through SNMP so I followed http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml#app

but when executing last command:

snmpset -v 1 -c private x.x.x.x .1.3.6.1.4.1.9.9.96.1.1.1.1.14.17 integer 4

I get an error:

Error in Packet.

Reason: (badValue) The value given has the wrong type or length.

Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.17

I am using c181x-advipservicesk9-mz.124-15.T3.bin. I would be grateful for your help!

1 REPLY
Cisco Employee

Re: running/startup config through SNMP

You should have set all of the OIDs in one packet. In the example, the snmpset command is only run once.

306
Views
0
Helpful
1
Replies