SCA BB not able to config or retrieve service config from SCE2020
The problems come from when i add wrong format in Params Prefix in HTTP URL in flavor setting after save SCABB are not able to save or retrieve config from SCE box need work around to delete wrong flavor from SCE box by command line.
error in SCA BB show that it fail to retrieve config because there were error format in Params Prefix/ in flavor setting
Failed to retrieve:
org.eclipse.emf.ecore.resource.Resource$IOWrappedException: An invalid XML character (Unicode: 0xf)was found in the value of attribute "paramsPrefix" and element is "httpUrl"
Re: SCA BB not able to config or retrieve service config from SC
From the given problem description I believe that your SCE is either got into "failure" mode or from some other reason the SCAS BB application was unloaded. Issue the CLI command "show system operation-status" If the SCE is not in failure mode i.e. ("operational" mode) It needs support file from that SCE.
Here is the URL for the further details for SCAS BB :
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...