Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Scripting & Nexus5000

Hi all,

Does the Nexus5000 support any kind of scripting (ie. EEM or some other UNIX shells maybe?)

Is it on the roadmap for some future version ?

regards,

Geert

6 REPLIES
Cisco Employee

Re: Scripting & Nexus5000

Bronze

Re: Scripting & Nexus5000

Seems to be only Nexus7000. Nexus 5000 does not show any eem information.

Cisco Employee

Re: Scripting & Nexus5000

While that document is for the N7K, the configuration guide for the N5K point to EEM being available:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/ov.html#wp1160864

Unfortunately, I do not have access to an N5K to verify.  If you do, you should be able to easily test the "event manager applet" command in config mode.

Bronze

Re: Scripting & Nexus5000

mmm...no success:

XXXXX(config)#  event ?

                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXXX(config)# event manager ?
                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXX(config)# event manager applet ?
                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXXX(config)# event manager applet


Running version 4.1(3)N2(1a) with the following features enabled:


Software
  BIOS:      version 1.3.0
  loader:    version N/A
  kickstart: version 4.1(3)N2(1a)
  system:    version 4.1(3)N2(1a)
  power-seq: version v1.2
  BIOS compile time:       09/08/09

sh feature
Feature Name          Instance  State  
--------------------  --------  --------
fcsp                  1         disabled
tacacs                1         enabled
fc-port-security      1         disabled
fabric-binding        1         disabled
port_track            1         enabled
npiv                  1         disabled
lacp                  1         enabled
npv                   1         disabled
interface-vlan        1         enabled
private-vlan          1         disabled
udld                  1         enabled
vpc                   1         enabled
cimserver             1         disabled
fcoe                  1         enabled
fex                   1         enabled

Cisco Employee

Re: Scripting & Nexus5000

Further research has led me to believe that the Fabric Manager blurb may be wrong, and EEM is not on the N5K.  I am checking with the product team to be sure.

Cisco Employee

Re: Scripting & Nexus5000

I have confirmed the N5K does not yet support EEM.  Support is being planned for a future release, however.  The documentation on Cisco.com has now been corrected.

837
Views
0
Helpful
6
Replies