Cisco Support Community
Community Member

SDM on 7200 router


I m trying to install sdm 2.2 and 2.3 which i downloaded from the site.we have 7200 routers and want to use SDM so i can see netflow graphs. i cant get it installed although the required config exist on the router.error says either the config is wrong or given username and password. The zip file for sdm doesnt show any cofig file for 7200 but shows for the other routers. can sdm be installed on 7200, is any extra hardware required.

mfl-bt-hlw-7200#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(2)T, RELEASE SOFTWARE (fc1)

Synched to technology version 12.3(1.9)

TAC Support:

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Fri 25-Jul-03 11:15 by ccai

Image text-base: 0x60008954, data-base: 0x61D4C000

ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)

BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(8a)E, EARLY DEPLOYMENT RELE


mfl-bt-hlw-7200 uptime is 44 weeks, 5 days, 14 hours, 42 minutes

System returned to ROM by power-on

System restarted at 19:14:16 BST Tue Jul 12 2005

System image file is "disk0:c7200-is-mz.123-2.T.bin"

cisco 7204VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memor


Processor board ID 28712146

R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

4 slot VXR midplane, Version 2.7

Last reset from power-on

G.703/E1 software, Version 1.0.

G.703/JT2 software, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Number of Fast PAs = 2

Number of Fast+Medium PAs = 2

Total number of PA bandwidth points = 600

3 FastEthernet/IEEE 802.3 interface(s)

4 Serial network interface(s)

125K bytes of non-volatile configuration memory.

47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102

Cisco Employee

Re: SDM on 7200 router

CreatePlease to create content