If you can tell us more on your network, it would be useful to tell you more details, in general we can separate PCs using VLANs on L2 switches or we can use routers, if you tell us more about your network we can help you decide the best solution, and also can you tell us about the type of problems you are trying to avoid.
Ok, the situation is this: I've been planning to install a Cisco Aironet AP to build a wifi. The problem i'm trying to avoid is the computers visibilities from each other. The thing is that this will be a public network so I have to protect (in a reacheable level) each pc on that network.
This netwok will not have internet access and it will be build for intranet use only but public.
Tell me if you want to know something else. As you see I have an amateur network knownledge.
Generally, since wireless networks exchange data through a broadcast of RF signals through air. Because of the broadcast nature that WLANs use, there is a greater threat of hackers or intruders who can access or corrupt the data this is the greatest threat on WLANs. In order to alleviate this problem, WLANs needs:
1. User authentication to prevent unauthorized access to network resources.
2. Data privacy to protect the integrity and privacy of transmitted data.
the post is very informative, but what I specifically need to know is about the computers, they cannot have any relations when they are connected to the network (seeing shared folders, ping, map, etc...). I want to know which type of implementation I need to use in order to achieve that.
-Computers connected to same network.
-Do not share anything between them.
Maybe I'm consulting on the wrong section of the forum...
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...