Re: Serial numbers of sh inv are not matching with CiscoWorks (L
To be Honest LMS 2.6 is now not EOL/EOS and has crossed the last date of support. Said that it is to birng to your notice how old this software is and can goof up with things which will be hard to t/shoot, so first recommendation is to upgrade the LMS atlease on LMS 3.x and preffered LMS 4.x.
Also, i would recommend you to upgrade your RME to version 4.0.6 atleast which is more better release in LMS 2.6 and there were some serial number issues addressd for some devices as well.
With that, could you manually check what SNMP value does the device shows via SNMP, by which we can check if LMS is showing incorrect or device is sending incorrectly.
Like I see my WISM module's serial number directly via SNMP WALK from device :
NMS-WL-6500#sh inv | in WISM
NAME: "WS-SVC-WISM-1-K9-DC Centralized Forwarding Card sub-module of 8", DESCR:
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...