Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Set SNMPv3 in DCNM 6.2(5)

Hello,

I have to setup DCNM for managing nexus 5000 and 7000 using snmp v3. But I find nothing in DCNM NOTE about how to set up the SNMP credentials MD5 and AES in DCNM.

When i go into admin > Data sources > lan , I can only setup the enable password and choose the Hash type (SHA, MD5) but no possible to enter the SNMP credentials.

When I go into admin > Server Properties, Section DATA SOURCES, only the SNMP default community can be set

Anyone can tell me what is the procedure to follow?

THANKS

3 REPLIES
Cisco Employee

Hi Rashid,you need to first

Hi Rashid,

you need to first discover the device ,use the below link:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/dcnm/fundamentals/configuration/guide/fund_dev_disc.html#wp1437324

 

rest all configuration need to be done via CLI:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/sm_snmp.html#wp1061002

 

hope it will help

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Thanks afrahmad for your

Thanks afrahmad for your response

So we don't need to configure the snmp user and credentials directly in the DCNM after configuring them into the nexus?

Best Regards

Cisco Employee

Correct . Thanks-Afroz**

Correct .

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
271
Views
0
Helpful
3
Replies
CreatePlease login to create content