Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

SFP's don't appear in LMS reports

Hi,

we have some SFP's connected to our switches (these switches are supported by LMS) but they don't appear in the reports.

I don't see anything about these devices in the supported devices tables.

Is it possible to get them shown in the LMS reports (User Tracking reports, I suppose)? Are they supported?

Many thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: SFP's don't appear in LMS reports

Getting the serial number for most GBIC and SFP interfaces is not possible in RME as RME will only get the serial number for containers.

Cisco Employee

Re: SFP's don't appear in LMS reports

No. Neither application delves that far into element management. The serial numbers would have to be tracked externally. You could also raise a product enhancement request with your account team to get this functionality in RME.

5 REPLIES
Cisco Employee

Re: SFP's don't appear in LMS reports

SFP ports, or are you referring to switching modules in ISR routers?

New Member

Re: SFP's don't appear in LMS reports

Hi,

if we execute "show inventory" on the switches, we obtain this:

NAME: "1", DESCR: "WS-C3750G-12S"

PID: WS-C3750G-12S-S , VID: V06, SN: FCZ1209W059

NAME: "GigabitEthernet1/0/1", DESCR: "10/100/1000BaseTX SFP"

PID: , VID: , SN: MTD610640

NAME: "GigabitEthernet1/0/2", DESCR: "10/100/1000BaseTX SFP"

PID: , VID: , SN: MTD025561

NAME: "GigabitEthernet1/0/3", DESCR: "10/100/1000BaseTX SFP"

PID: , VID: , SN: MTD025608

but we cannot see this information in LMS reports. Is it possible to obtain it?

Thanks.

Cisco Employee

Re: SFP's don't appear in LMS reports

Getting the serial number for most GBIC and SFP interfaces is not possible in RME as RME will only get the serial number for containers.

New Member

Re: SFP's don't appear in LMS reports

And would it be possible to get them from the Campus Manager User Tracking?

Cisco Employee

Re: SFP's don't appear in LMS reports

No. Neither application delves that far into element management. The serial numbers would have to be tracked externally. You could also raise a product enhancement request with your account team to get this functionality in RME.

382
Views
4
Helpful
5
Replies
CreatePlease to create content