Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Shaping / Quota

Hi,

Our topology consists of 1x 3700 trunk to 8x 3560 switch stack. We use VLANs per department with different network address per VLAN.

Basically, we want to shape a specific VLAN to a speed once they reach a quota (10Gig download)...

Is this possible running a simple network?

We are using 3700 Software (C3725-ADVSECURITYK9-M), Version 12.4(7c) and Cisco standard IOS on our switch stack.

Otherwise, I may have to use time-range QOA to shape traffic on specific time of the day.

Thanks

Peter

2 REPLIES
New Member

Re: Shaping / Quota

I am not aware of a mechanism which can do it on basis of a total quota, but we can shape it based on the rate of transfer (which will be a good way) on congested interfaces. Also you can probably calculate the rate based on download allowed per day and allow the same.

check http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml#policingvsshaping

it might be useful.

Cheers,

Naveen B

New Member

Re: Shaping / Quota

Hi Naveen,

Thanks, I thought so.

I know it requires 3rd party application to set quota.

Ill check the document you posted.

Thanks

Peter

111
Views
0
Helpful
2
Replies