Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Shutting down Cisco Works

Ok, this is a simple question that I should know, but....

How would i shutdown Cisco Works (LMS 2.6) completely?

I need to expand the /var/adm/CSCOpx file system and want to fully shutdown the app so none of the databases become corrupted. Secondary question, would moving this file system cause any issues within CiscoWorks? It currently resides in /var, but I am going to have /var/adm/CSCOpx made into its own filesystem and have all the files copied over. Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Shutting down Cisco Works

/etc/init.d/dmgtd stop

/opt/CSCOipm/bin/ipm stop

That will stop all of LMS. But your best bet with doing file system operations is to reboot, and have the system come up in single-user mode. That way you can safely have /var unmounted.

Making /var/adm/CSCOpx into its own file system is fine provided none of the paths and file attributes change. Be sure to use a safe copy method when migrating files. I like:

# cd /mnt/var/adm/CSCOpx

# tar -cpf . - | (cd /var/adm/CSCOpx && tar -xpf -)

1 REPLY
Cisco Employee

Re: Shutting down Cisco Works

/etc/init.d/dmgtd stop

/opt/CSCOipm/bin/ipm stop

That will stop all of LMS. But your best bet with doing file system operations is to reboot, and have the system come up in single-user mode. That way you can safely have /var unmounted.

Making /var/adm/CSCOpx into its own file system is fine provided none of the paths and file attributes change. Be sure to use a safe copy method when migrating files. I like:

# cd /mnt/var/adm/CSCOpx

# tar -cpf . - | (cd /var/adm/CSCOpx && tar -xpf -)

113
Views
5
Helpful
1
Replies
CreatePlease to create content