I have 6 servers. 1 of the 6 servers is simply configured to be a SYSLOG collector for the 5 other servers.
The syslog collector only runs Common Services. I have configured this server to be the Master SSO server and registered applications from other servers onto it.
All other servers are configured as slaves under SSO to the syslog collector server.
When I click on a link that is on another server I always get the syslog collectors main screen. When I try to logon to the different servers manually they authenticate just fine with a user account that only exists on the syslog collector.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...