Slowness in DFM create view

[oalvi]

in the DFM 2.0.5 server under the Configuration:Other-Configurations Alerts and Activities Defaults- When I create a view, It takes long time to open also after click on create button

[Joe Clarke]

What is a long time exactly? What are the specs on your server and client? How many other views do you have created?

[oalvi]

It takes 4 min exactly when I click Alerts and Activies Default and also 4 min when i click Create.

This is the first view I want to create.

Number of devices in DFM only 56 devices

Number of devices in DCR 3200+

and DFM server it runs on separate server with salve mode.

server specification:

Sun Fire V210 2 cpu 1.3 Ghz, 8 GB of memory

Regarding space please find below the details:

Filesystem kbytes used avail capacity Mounted on

/dev/md/dsk/d0 16526762 5787795 10573700 36% /

/proc 0 0 0 0% /proc

mnttab 0 0 0 0% /etc/mnttab

fd 0 0 0 0% /dev/fd

swap 22294720 8 22294712 1% /var/run

swap 22294792 80 22294712 1% /tmp

/dev/md/dsk/d6 37183076 628369 36182877 2% /scratch

[Joe Clarke]

The slowness most likely stems from the number of devices in DCR. While I see a bit of slowness on my server, I do not have nearly the same number of devices in DCR, so it takes much less than four minutes to bring up the screens.

I did not find any bugs related to this slowness, so I recommend you open a TAC Service Request so a new one can be filed. Some additional VGM debugging may also be required to isolate exactly where in the code path the slowdown is occurring.

[oalvi]

Now It solved with LMS 2.6 Update.