I have a SM-32A module installed in slot 1 in a Cisco 3925 router to act as a terminal server providing reverse telnet sessions to various other device console ports. My understanding is that the ports on the SM-32A are referenced as "slot/port" - in my case 1/0-31. The terminal server L0 address is 22.214.171.124 What I cannot determine is do I need to configure an ip host table with conventional port numbers to facilitate connections e.g.
ip host R 2000 126.96.36.199
ip host R1 2001 188.8.131.52
ip host R3 2003 184.108.40.206
ip host R31 2031 220.127.116.11
If so, are the port numbers 2000 to 2031 or is another convention used?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.