Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP and OID

Hi,I am trying to poll a SNMP mib for bgp peer status from Kiwi CatTools. The Cisco OID I am trying to poll is 1.3.6.1.2.1.15.3 - bgpPeerTable. The Cisco Router I am using is a 2811 and IOS is c2800nm-entservicesk9-mz.124-10a.bin. I have basic ip connectivity and can gather things like system name, ios version etc., but cannot get the bgppeertable output - I need to collate the output of the peer status ie. show ip bgp summary from every node.

Where am I going wrong?

Any advice will be gratefully received.

Regards

Mary

snmp-server view novacm internet included

snmp-server view novacm bgp included

snmp-server view novacm internet.6.3.16 excluded

snmp-server community w2e37uh1 RW 99

snmp-server community cable-docsis view novacm RW 99

snmp-server host 10.82.124.200 w2e37uh1

RouterB#sh access-list 99

Standard IP access list 99

10 permit 10.82.124.200 (72 matches)

20 permit 19.46.240.64, wildcard bits 0.0.0.15 (100 matches)

30 permit 19.46.240.80, wildcard bits 0.0.0.15

Routerb#

2 REPLIES
Cisco Employee

Re: SNMP and OID

Keep in mind that the object bgpPeerTable is not-accessible.

Did you try to walk any of the objects contained in the table like bgpIdentifier? Do they respond?

New Member

Re: SNMP and OID

If the bgpPeerTable is not accessible - that means I will never be able to collate the results of the bgp peer output from either router on my network - is that correct?

525
Views
0
Helpful
2
Replies
CreatePlease to create content