Is there a possibility to read the firewall configuration over snmp and write it down to a tftp server? The customer has two firewallsystems and want to save the configurations daily to a tftp server. He has a linux server to provide the snmp and tftp services. The CSM is too big for this really little problem. For routers and switches exist a solution, named pancho.
The PIX/ASA do not support SNMP read-write operations, so getting the config via SNMP/TFTP like with IOS or CatOS will not be possible. CiscoWorks RME uses telnet or SSH to capture the config from these devices.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...