Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP - Catalyst 3560

I need to active SNMP on some of our 3560 switches for a third party support vendor.

We want to do it in a way that is secure, and only allows the 3rd party to see certain things on the switch.

What it appears I need are:

1)An Access List with specific IP addresses,

2)A new community string with Read Only Access

3)Access to only certain MIB's. We need to track Packet Loss, Jitter, etc., particular to our VOIP network.

I know how to turn on SNMP with a new community name, and give it read only access...however, I am not sure on the Access List, or MIB portions.

Any help would be great.

1 REPLY
Cisco Employee

Re: SNMP - Catalyst 3560

For the acl you would just do something like:

access-list 1 permit 10.10.10.1

Then add the acl to your comm string

snmp-server community public ro 1

For the access to certain mibs you would do snmp-server views:

snmp-server view myview internet included

snmp-server view myview ciscoFlashMIB excluded

Then apply this to the comm string:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a008030c762.html#wp1001150

284
Views
0
Helpful
1
Replies
CreatePlease login to create content