Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP configuration in Cisco ASA 5525x

Snmp server is sending to me the next message: "Community with read/write permission required". Please help me to configure read/write permission into communities.

The firewall is ASA 5525x

Thanks

5 REPLIES
New Member

snmp-server community xxxx rw

snmp-server community xxxx rw

 

where xxxx = your read/write community name

New Member

The firewall don't accept "rw

The firewall don't accept "rw", that is the problem.

Silver

Hi, The ASA does not support

Hi,

 

The ASA does not support SNMP write. You cannot configure rw on the ASA. Only read(ro) is supported.

 

Thanks

John
 

New Member

Thanks for the correction,

Thanks for the correction, John.  That actually makes sense from a security standpoint.  

New Member

Hi, Firewall do not allow

Hi,

 

Firewall do not allow read/write permissions. All you can do is to set password on different shells of firewall.

 

 

Jerry Paul

www.thenetworkhardware.com

161
Views
5
Helpful
5
Replies