Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

SNMP (CPU Load for CiscoCatalyst3500)

Hello:

executing from linux these commands to check the CPU load on a CiscoCatalyst3500 I obtain the same value for days, no matter the time.

---------------------------------------

# /usr/bin/snmpget -Ov -OQ -OU -t 1 -r 9 -m ALL -v 2c -c public 192.168.8.11 1.3.6.1.4.1.9.2.1.58.0

Answer: 4

------------------------

# /usr/bin/snmpget -Ov -OQ -OU -t 1 -r 9 -m ALL -v 2c -c public 192.168.8.11 1.3.6.1.4.1.9.2.1.57.0

Answer: 4

---------------------------------------

My concern is if I'm checking the right OIDs, if it's the case, how is possible that this value keeps unchanged.

Thanks in advance for any answer

Enediel

1 REPLY
Red

Re: SNMP (CPU Load for CiscoCatalyst3500)

These are the old MIB objects, but they should still work.

If you have doubt regarding the output, you may compare to: show proc cpu

The newer MIB objects from the CISCO-PROCESS-MIB are described at:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtml

114
Views
0
Helpful
1
Replies
CreatePlease to create content