Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

SNMP download of config from Catalysts.

Hi all,

could someone help me if its possible

and if yes ..how..download configuration of Catalyst switches 2950..3560 and so on

(I mean only small switches not C6500) throught snmp?

Thanks a lot for help.

BR

jl

2 REPLIES
Red

Re: SNMP download of config from Catalysts.

Yes, you may use the same procedure for all switches running IOS.

For additional information, see the tech tip:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml

Cisco Employee

Re: SNMP download of config from Catalysts.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml

Just make sure your switch code supports the CISCO-CONFIG-COPY-MIB

119
Views
10
Helpful
2
Replies
CreatePlease to create content