Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP for 3 parties

Hi,

Is there a way for SNMP to be accessible by 3 different parties? 2 service provider and the enterprise need to poll the router and receive traps to each of their NMS. Can i setup multiple SNMP trap source and tie each source to a different host server?

1 REPLY
Cisco Employee

Re: SNMP for 3 parties

Sure. You don't even need SNMPv3 for this, either (however, v3 will make things more secure). You can define as many trap destinations as you want, though Cisco recommends no more than three:

snmp-server host 10.1.1.1 ...

snmp-server host 20.1.1.1 ...

You can also define multiple community strings or SNMPv3 credentials for polling. See http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml for more on securing SNMP.

99
Views
0
Helpful
1
Replies
CreatePlease login to create content