Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

SNMP: Know the protocol status of the interface

Hi,

In my case I'll use: vlanTrunkPortDynamicStatus CISCO-VTP-MIB (1.3.6.1.4.1.9.9.46.1.6.1.1.14)

Knowing that Nagios is installed on EyesOfNetwork        / srv / eyesofnetwork / nagios / mibscisco /

What changes should I do in the script of this MIB that will be associated with my case?

Thanks in advance.

regards,

Medali

1 REPLY
Cisco Employee

SNMP: Know the protocol status of the interface

Not sure what do you mean by the protocol status of an interface. I know of admin and operational status of interface.

The OID you mentioned would Indicates whether the specified interface is either acting as a trunk or not.

Please clarify on what exactly you're looking for.

-Thanks
Vinod
**Encourange contributors. RATE them. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **
109
Views
0
Helpful
1
Replies
CreatePlease to create content