Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

snmp linkdown traps

Hi,

Is there any way to force a switch to only send linkdown traps for specific ports?

Do you just disable linkdown snmp in the global config then enable it on the port?

Matt

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: snmp linkdown traps

Switches are typically easier because you have the interface range command. Additionally, with a tool like CiscoWorks Resource Manager Essentials, you can deploy this change across a large number of switches quickly.

3 REPLIES
Cisco Employee

Re: snmp linkdown traps

Other way around. Enable the traps globally, then configure:

no snmp trap link-status

Under the interfaces you do not wish to send traps.

New Member

Re: snmp linkdown traps

thanks,

should be fun on 100 switches.

Our network mon app keeps getting false critical because of the access ports.

Cisco Employee

Re: snmp linkdown traps

Switches are typically easier because you have the interface range command. Additionally, with a tool like CiscoWorks Resource Manager Essentials, you can deploy this change across a large number of switches quickly.

233
Views
0
Helpful
3
Replies