Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

snmp linkup/linkdown traps not being sent to the snmp server

Hi All,

I have configured the Cisco 6509 to send all the snmp traps to the NEtact snmp server. I get the config change traps being sent to the server. But when I plug and unplug my laptop to a Gigabit interface I do not get any traps.

I am able to see the linkup and linkdown logs on the console but not on the snmp server.

Hardware:

PACO-C6509

Software Version:

12.2(18)SXF10

logging snmp-authfail

snmp-server community xxx RO 15

snmp-server community yyy RW 15

snmp-server trap-source Vlan401

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps chassis

snmp-server enable traps module

snmp-server enable traps transceiver all

snmp-server enable traps casa

snmp-server enable traps tty

snmp-server enable traps ospf state-change

snmp-server enable traps ospf errors

snmp-server enable traps ospf retransmit

snmp-server enable traps ospf lsa

snmp-server enable traps ospf cisco-specific state-change

snmp-server enable traps ospf cisco-specific errors

snmp-server enable traps ospf cisco-specific retransmit

snmp-server enable traps ospf cisco-specific lsa

snmp-server enable traps bgp

snmp-server enable traps config-copy

snmp-server enable traps config

snmp-server enable traps dlsw

snmp-server enable traps event-manager

snmp-server enable traps frame-relay

snmp-server enable traps hsrp

snmp-server enable traps ipmulticast

snmp-server enable traps MAC-Notification move threshold

snmp-server enable traps msdp

snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message

snmp-server enable traps rf

snmp-server enable traps rtr

snmp-server enable traps slb real virtual csrp

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps syslog

snmp-server enable traps flex-links status

snmp-server enable traps sonet

snmp-server enable traps dial

snmp-server enable traps fru-ctrl

snmp-server enable traps entity

snmp-server enable traps rsvp

snmp-server enable traps srp

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps flash insertion removal

snmp-server enable traps c6kxbar intbus-crcexcd intbus-crcrcvrd

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps csg agent quota database

snmp-server enable traps port-security

snmp-server enable traps mpls traffic-eng

snmp-server enable traps mpls ldp

snmp-server enable traps isakmp policy add

snmp-server enable traps isakmp policy delete

snmp-server enable traps isakmp tunnel start

snmp-server enable traps isakmp tunnel stop

snmp-server enable traps ipsec cryptomap add

snmp-server enable traps ipsec cryptomap delete

snmp-server enable traps ipsec cryptomap attach

snmp-server enable traps ipsec cryptomap detach

snmp-server enable traps ipsec tunnel start

snmp-server enable traps ipsec tunnel stop

snmp-server enable traps ipsec too-many-sas

snmp-server enable traps alarms

snmp-server enable traps vlan-mac-limit

snmp-server enable traps voice poor-qov

snmp-server enable traps mpls vpn

snmp-server host 10.x.y.17 public

snmp-server host 10.x.y.23 public

Please let me know if you have come across this kind of an issue before.

DO i have to configure anything under the interface mode?

Please let me know.

This is the sample interface configuration:

interface GigabitEthernet1/44

description SW1-Netact Port 0/18 QTSGSN1-OM-to-NetAct-Router-1

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 400,401

--More-- switchport mode trunk

switchport nonegotiate

no ip address

speed 100

duplex full

1 REPLY
Blue

Re: snmp linkup/linkdown traps not being sent to the snmp server

Do you see the "## sent" counters in the output of "show snmp" incrementing at the same time linkup and linkdown are seen on the console?

...

SNMP logging: enabled

Logging to 10.x.y.17, 0/10, ## sent, ## dropped.

Logging to 10.x.y.23, 0/10, ## sent, ## dropped.

585
Views
0
Helpful
1
Replies