Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP Monitoring

Hello,

I'm trialing solarwinds to monitor my test network here.

I configured the following command on my router:

snmp-server community private RW

In solarwinds, it asks for the I.P address and SNMP Community String.

When I enter the above fields, i'm getting error messages:

'10.0.0.1' does not respond to SNMP Queries using 'private'

Any steps or configurations which i'm doing wrong here?

Thanks

4 REPLIES
Blue

Re: SNMP Monitoring

Check if there's any ACL blocking SNMP traffic to the router.

Cisco Employee

Re: SNMP Monitoring

Try configuring a RO string as well, and see if that makes any difference.

-J

New Member

Re: SNMP Monitoring

also try to configure the host server

snmp-server host 10.0.0.1 public

That may help

Cisco Employee

Re: SNMP Monitoring

Start a snmp debug on the router using the 'debug snmp packet' command. Then fire up solarwinds and try to connect. See if the debug produces any output to confirm that the packets are being received and replies are being sent back. It that looks good, check for any firewall or access-lists blocking the replies on the return path of the packets to the NMS.

126
Views
5
Helpful
4
Replies
CreatePlease to create content