Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP - No Such Object available on this agent at this OID for ONS-15600 ?

Hello community,

I'm currently working on a ONS-15600 and router , but I've encountered some problems when using SNMP for getting the "No Such Object available on this agent at this OID" on ONS-15600

then I try to execute  on ONS-15600:

# snmpget -v2c -c private  10.10.6.30 1.3.6.1.4.1.9.9.91.1.1.1.1.4

i get :

SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4 = No Such Instance currently exists at this OID

but on router,i can get :

SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6052 = INTEGER: 1499
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6053 = INTEGER: 2485
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6054 = INTEGER: 3247
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.6055 = INTEGER: 1196

.......................................

Are there any particular settings I must do in order to access the values of this MIB for ONS devices?


SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4 = No Such Instance currently exists at this OID

 

 

3 REPLIES
Cisco Employee

What you are trying to poll

What you are trying to poll is form CISCO-ENTITY-SENSOR-MIB.

As per the ONS 15600 version 7.2 guide I don't see this MIB is supported/implemented on this platform. Please check here :

IETF Standard MIBs Implemented in the ONS 15600 System 

Please check if the version you're running has this MIB supported or not.

-Thanks

Vinod

-Thanks Vinod **Rating Encourages contributors, and its really free. **
New Member

hi vinod,i want to monitor

hi vinod,

i want to monitor For Temperature, Tx Power, Rx Power, and Tx Bias Current, values ,

anyone knows the mib value for this on ONS devices ?

Cisco Employee

Because all these details

Because all these details need the same MIB, you dont have a supported software with, I dont think it is possible.

You probably have to depend on the device CLI, check this document here:

http://www.cisco.com/c/en/us/td/docs/optical/15000r9_1/release/notes/600e91_relnotes.html#wp217418

-Thanks

Vinod

-Thanks Vinod **Rating Encourages contributors, and its really free. **
215
Views
0
Helpful
3
Replies