Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP OID for IP NAT translations

Hi,

I am looking for the SNMP OID to monitor the sh ip nat translations on a cisco 6500.

Can anyone please know if this is available.

Thanks,

Victor

7 REPLIES
Cisco Employee

Re: SNMP OID for IP NAT translations

What version of IOS is this switch running?

New Member

Re: SNMP OID for IP NAT translations

The IOS version is 12.2

===> 122-18.SXF14.

Thanks

Cisco Employee

Re: SNMP OID for IP NAT translations

I need to see the "show version" output.

New Member

Re: SNMP OID for IP NAT translations

hi Joe,

Sh ver below

Cisco IOS Software, s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Sun 09-Nov-08 23:57 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)


System returned to ROM by s/w reset  EDT (SP by power-on)
System restarted at 01:43:21 EDT
System image file is "sup-bootdisk:s3223-ipservicesk9_wan-mz.122-33.SXH4.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6506-E (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
22 Virtual Ethernet interfaces
49 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

Cisco Employee

Re: SNMP OID for IP NAT translations

This image does not support the CISCO-IETF-NAT-MIB which provides details about active translations.

New Member

Re: SNMP OID for IP NAT translations

Thanks Joe,

Please tell me which image supports the MIB, will plan on Upgrading if required.

Victor

Cisco Employee

Re: SNMP OID for IP NAT translations

This MIB is not supported for your platform.  I had thought it was, but there was a glitch with the MIB Locator.  For a complete list of supported platforms and images see http://tools.cisco.com/ITDIT/MIBS/AdvancedSearch?ReleaseSel=0&PlatformSel=0&fsSel=0&mibIdArr=250009&totalPages=1&totalNoOfImages=-1&pgSelect=1

1316
Views
3
Helpful
7
Replies