Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP OID for power supply FAN ?

I am looking for OID for the fans for PS for the 3750X series switches as indicated below. There is a bug in SE6 that marks your PS-FAN faulty even if it's running OK. I have yet to be able to find the OID for that value... 

 

lanedge-stack1c#show env stack
SWITCH: 1
FAN 1 is OK
FAN 2 is OK
PS-FAN1 is FAULTY                   <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
PS-FAN2 is NOT PRESENT
TEMPERATURE is OK
Temperature Value: 30 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold    : 60 Degree Celsius
POWER is OK
RPS is NOT PRESENT

 

 

 

  • Network Management
4 REPLIES
Cisco Employee

HI ,You need to walk CISCO

HI ,

You need to walk CISCO-ENVMON-MIB for the TEMP/PowerSupply/FAN

 

1.3.6.1.4.1.9.9.13.1.4.1.2 ciscoEnvMonSupplyState

1.3.6.1.4.1.9.9.13.1.5.1.2 ciscoEnvMonSupplyStatusDescr

 

Hope it will help

 

Thanks-

Afroz

****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Thanks for the reply AfrozBut

Thanks for the reply Afroz

But the OIDs are for hardware on the chassis, not for fans the power supply itself. 

 

 

 

Cisco Employee

use this one:Object  

use this one:

Object    cefcFRUPowerOperStatus OID    1.3.6.1.4.1.9.9.117.1.1.2.1.2

 

This should give you the desired result.

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

still doesn't appear to be

still doesn't appear to be right

Here is the SNMP result

SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.1058 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.2058 = INTEGER: 2

 

 

 

2 indicates both are on, but two are faulty and two are not present.... this is a 2 switch stack, btw.

SWITCH: 1
FAN 1 is OK
FAN 2 is OK
PS-FAN1 is FAULTY
PS-FAN2 is NOT PRESENT

 

SWITCH: 2
FAN 1 is OK
FAN 2 is OK
PS-FAN1 is FAULTY
PS-FAN2 is NOT PRESENT

 

regards

Peter

 

 

563
Views
0
Helpful
4
Replies
This widget could not be displayed.