Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP OID's for FWSM, ASA, ACE and IPS

Dear Friends,

I am trying to take a backup of 13 routers / switches using snmpset, the composition being 1 3750, 4 6500's, 6 7600's , 2 7200's.

I am successfully able to take the backup of the devices.

Here's the command i have used:

snmpset -v 2c -t 60 -c IDCRW -M "C:\mibs" 172.20.1.132 .1.3.6.1.4.1.9.2.1.55.172.16.0.200 s 172.20.1.132

I wanted to know if there is a possibility to also take backup of FWSM, ASA, ACE, IPS using similar SNMP OID's?

Does anyone know the relevant OID's for these devices?

Thanks a lot

Gautam

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SNMP OID's for FWSM, ASA, ACE and IPS

No, the firewall devices do not support SNMP SET operations, and the IPS doesn't support the CISCO-CONFIG-COPY-MIB or OLD-CISCO MIBs.

1 REPLY
Cisco Employee

Re: SNMP OID's for FWSM, ASA, ACE and IPS

No, the firewall devices do not support SNMP SET operations, and the IPS doesn't support the CISCO-CONFIG-COPY-MIB or OLD-CISCO MIBs.

985
Views
0
Helpful
1
Replies